Deckwright Anti-Slip Decking Insert Kit – Don’t Slip Up!

DeckWright Anti-Slip Decking Kit

When timber decking is proving to be slippery when wet or dirty, installing DeckWright Anti-Slip Decking Inserts can lessen the risk of injury and provide you reassurance when walking on a wet timber deck. DeckWright inserts can be easily fitted into most timber decking boards, providing you with an attractive, long lasting solution to a slippery problem for both domestic and commercial projects.

 

How do DeckWright Inserts work? 

DeckWright Inserts encompass a universally shaped plastic T bar that holds a resin and aggregate formulation.When inserted into the grooves of a decking board, the insert will sit proud of the timber and provide  grip – even when wet. To achieve maximum grip, we recommend using two DeckWright Strips per decking board.

Where can DeckWright Inserts be used?DeckWright Anti-Slip Decking Inserts

DeckWright Inserts can be used in various locations including heavy traffic commercial areas and as a garden decking solution. Wherever you have timber decking, DeckWright inserts can increase your safety and transform your standard timber decking into a non-slip deck.

How many inserts will I need?

Use the following method to calculate how many metres of DeckWrigth inserts you require:

  • Determine what area you wish to cover in square metres.
  • Establish how many grooves you want to anti-slip – two per decking board is recommended.
  • Determine how many deck boards cover a metre – for this example we will assume 8.

Square metres x number of boards in a metre x number of grooves to anti-slip = Total linear metres

e.g. 10 square metres x 8 boards in a metre x 2 grooves = 160 linear metres

* DeckWright Anti-Slip Decking Inserts are supplied in one metre lengths.

How to install DeckWright Anti-Slip Decking Inserts

DeckWright Anti-Slip Decking Inserts

  1. Before you begin, ensure the inserts are <18oC and that your decking is clean, dry and free from debris.
  2. Apply 3 mm bead of the specially formulated adhesive to the groove of the decking board that you will be placing the insert.
  3. Trim the insert to the desired length, firmly place into the groove and apply pressure.
  4. For optimum results, allow to dry for a minimum of 3 hours.

What’s included in a DeckWright Anti-Slip Decking Inserts Kit?

  • 25 x 1 metre Granite Grey colour inserts
  • 1 x DeckWright Adhesive

 

Available to purchase from BHC Merchants.

Contact today – Telephone: 01555 840026 or E-Mail: shopoffice@bhc.ltd.uk

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *